View this product on PerformanceHealth.com
Related SKUs:
Jump to Section:
Questions & Answers:
Do PALS Foam Electrodes from Axelgaard products contain latex?
All products manufactured by Axelgaard Manufacturing, including PALS Foam Electrodes Lite, are latex-free. Latex is not used in the electrodes or the packaging.
Are PALS Foam Electrodes from Axelgaard disposable?
PALS Foam Electrodes from Axelgaard are disposable. When the electrode shows wear and tear, or is no longer comfortable for the patient, simply replace them with a new set.
How are PALS Foam Electrodes from Axelgaard removed from the skin?
Remove PALS Foam Electrodes from Axelgaard from the skin by lifting them from the edge - not the lead wire.
Can more than one patient use PALS Foam Electrodes from Axelgaard?
The FDA requires PALS Foam Electrodes from Axelgaard to be labeled for single patient use. The electrodes are intended for single patient use only. By sharing electrodes, they are subject to cross-contamination. They are disposable and should be discarded if compromised, and a fresh set used.
Can hot or cold packs be used with PALS Foam Electrodes from Axelgaard?
Hot or cold packs on PALS Foam Electrodes from Axelgaard electrodes for long periods can cause adhesive separation.
What is required to prepare the skin for the application of PALS Foam Electrodes from Axelgaard?
Before applying PALS Foam Electrodes from Axelgaard, the user's skin must be cleaned with soap and water, removing lotions, oils, make-up, and dead skin. Clean skin is the most critical factor in the number of applications for an electrode.
What are the storage instructions of the PALS Foam Electrodes from Axelgaard?
After each use of the PALS Foam Electrodes from Axelgaard, the electrode must be returned to the "ON" side of the Mylar liner and placed in the original packaging to prevent moisture loss. Store at room temperature, somewhere between 41° and 80°.
Should PALS Foam Electrodes from Axelgaard be stored in the refrigerator?
Do NOT store PALS Foam Electrodes from Axelgaard in the freezer or refrigerator. Do not leave in extreme heat. Do not submerge in water. Do not leave it on the outside of the packaging.
If you have any questions please contact our customer support.