View this product on

Related SKUs:

Jump to Section:

Questions & Answers:

Do PALS Electrodes from Axelgaard products contain latex?

All products manufactured by Axelgaard Manufacturing, including PALS Electrodes, are latex-free. Latex is not used in the electrodes or the packaging.

Are PALS Electrodes from Axelgaard disposable?

PALS Electrodes from Axelgaard are disposable. When the electrode shows wear and tear, or is no longer comfortable for the patient, simply replace them with a new set.

How are PALS Electrodes from Axelgaard electrodes removed from the skin?

Remove PALS Electrodes from Axelgaard from the skin by lifting them from the edge - not the lead wire.

Can more than one patient use PALS Electrodes from Axelgaard?

The FDA requires PALS Electrodes from Axelgaard to be labeled for single patient use. The electrodes are intended for single patient use only. By sharing electrodes, they are subject to cross-contamination. They are disposable and should be discarded if compromised, and a fresh set used.

Can hot or cold packs be used with PALS Electrodes from Axelgaard?

Hot or cold packs on PALS Electrodes from Axelgaard for long periods can cause adhesive separation.

What is required to prepare the skin for the application of PALS Electrodes from Axelgaard?

Before applying PALS Electrodes from Axelgaard, the user's skin must be cleaned with soap and water, removing lotions, oils, make-up, and dead skin. Clean skin is the most critical factor in the number of applications for an electrode.

What are the storage instructions of the PALS Electrodes from Axelgaard?

After each use of the PALS Electrodes from Axelgaard, the electrode must be returned to the "ON" side of the Mylar liner and placed in the original packaging to prevent moisture loss. Store at room temperature, somewhere between 41° and 80°.

Should PALS Electrodes from Axelgaard be stored in the refrigerator?

Do NOT store PALS Electrodes from Axelgaard in the freezer or refrigerator. Do not leave in extreme heat. Do not submerge in water. Do not leave it on the outside of the packaging.

Contact Us:

If you have any questions please contact our customer support.