View this product on PerformanceHealth.com
Related SKUs:
Jump to Section:
Questions & Answers:
How long does it take to heat 3" of water in the Portable Forma-Splint Pan from Whitehall?
The amount of time to heat 3" of water in the Portable Forma-Splint Pan from Whitehall depends greatly on the water temperature in the pan. Generally, it will take 35-40 minutes.
What are the cleaning instructions for the Portable Forma-Splint Pan from Whitehall?
When cleaning the Portable Forma-Splint Pan from Whitehall, begin by switching off, unplugging the unit, and emptying the pan. Use mild, non-abrasive detergents or a mild mixture of ammonia, wiping in the direction of the stainless steel grain lines to minimize marring or scratching the surface. Rinse with clean, warm water and wipe dry. Do not use bleach, chlorinated solvents, or other harsh chemicals to clean the stainless steel surfaces. If there are hard-water spots, use a strong solution of vinegar and water and rinse with clean, warm water, and wipe dry.
Is water required to operate the Portable Forma-Splint Pan from Whitehall?
Never operate with Portable Forma-Splint Pan from Whitehall without properly filling with water; it will damage the heating element.
What size splinting sheets will the Portable Forma-Splint Pan from Whitehall accommodate?
The Portable Forma-Splint Pan from Whitehall will accommodate splinting sheets up to 19' x 11".
Can the Portable Forma-Splint Pan from Whitehall be plugged in before it is filled with water?
Do not operate the Portable Forma-Splint Pan from Whitehall while the unit is dry. Fill the unit with water before plugging in the unit. If there is no water in the pan, the heating element will burn out.
How can the Portable Forma-Splint Pan from Whitehall be sterilized?
Sterilize the Portable Forma-Splint Pan from Whitehall with alcohol. Bleach or iodine should not be used. If they are, thoroughly rinse. Using bleach or iodine without completely rinsing can cause a dulling appearance and possible pin holes that leak.
If you have any questions please contact our customer support.